Please use this identifier to cite or link to this item:
http://hdl.handle.net/11452/31682
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Moses, Anthony John | - |
dc.date.accessioned | 2023-03-22T06:56:08Z | - |
dc.date.available | 2023-03-22T06:56:08Z | - |
dc.date.issued | 2003-09-15 | - |
dc.identifier.citation | Derebaşı, N. vd. (2003). “Mathematical model for estimation of dynamic losses of grain oriented 3% SiFe toroidal wound cores up to 1 kHz”. Sensors and Actuators A-Physical, 106(1-3), 101-103. | en_US |
dc.identifier.issn | 0924-4247 | - |
dc.identifier.uri | https://doi.org/10.1016/S0924-4247(03)00143-2 | - |
dc.identifier.uri | https://www.sciencedirect.com/science/article/pii/S0924424703001432 | - |
dc.identifier.uri | http://hdl.handle.net/11452/31682 | - |
dc.description | Bu çalışma, 03-05 Temmuz 2002 tarihleri arasında Athens[Yunanistan]’da düzenlenen 4. European Magnetic Sensor and Actuators Conference’da bildiri olarak sunulmuştur. | tr_TR |
dc.description.abstract | The total loss per cycle was previously formed as P/f congruent to k(0) + k(1) f + k(2) f(0.5) for 3% SiFe in the range of 0 less than or equal to f less than or equal to 100Hz. A mathematical model for core losses including the skin effect is improved using Matlab(TM) up to 1 kHz induction frequency. This model uses an approach similar to the above equation. However, it has some extra terms for high frequency and geometrical effects, it is in good agreement with experimental data measured previously on a range of toroids magnetized between 50 Hz and 1 kHz. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Elsevier | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/ | * |
dc.subject | Engineering | en_US |
dc.subject | Instruments and instrumentation | en_US |
dc.subject | Magnetic modeling | en_US |
dc.subject | 3% SiFe | en_US |
dc.subject | Power losses | en_US |
dc.subject | Magnetic toroidal wound core | en_US |
dc.subject | Magnetic- properties | en_US |
dc.subject | Magnetic flux | en_US |
dc.subject | Magnetic hysteresis | en_US |
dc.subject | Magnetization | en_US |
dc.subject | Mathematical models | en_US |
dc.subject | Skin effect | en_US |
dc.subject | Toroids | en_US |
dc.subject | Sensors | en_US |
dc.title | Mathematical model for estimation of dynamic losses of grain oriented 3% SiFe toroidal wound cores up to 1 kHz | en_US |
dc.type | Article | en_US |
dc.type | Proceedings Paper | en_US |
dc.identifier.wos | 000184847600024 | tr_TR |
dc.identifier.scopus | 2-s2.0-0041377725 | tr_TR |
dc.relation.publicationcategory | Konferans Öğesi - Uluslararası | tr_TR |
dc.contributor.department | Uludağ Üniversitesi/Fen-Edebiyat Fakültesi/Fizik Bölümü. | tr_TR |
dc.relation.bap | 2001/61 | tr_TR |
dc.contributor.orcid | 0000-0003-2546-0022 | tr_TR |
dc.identifier.startpage | 101 | tr_TR |
dc.identifier.endpage | 103 | tr_TR |
dc.identifier.volume | 106 | tr_TR |
dc.identifier.issue | 1-3 | tr_TR |
dc.relation.journal | Sensors and Actuators A-Physical | en_US |
dc.contributor.buuauthor | Derebaşı, Naim | - |
dc.contributor.buuauthor | Küçük, İlker | - |
dc.contributor.researcherid | AAI-2254-2021 | tr_TR |
dc.relation.collaboration | Yurt dışı | tr_TR |
dc.subject.wos | Engineering, electrical and electronic | en_US |
dc.subject.wos | Instruments and instrumentation | en_US |
dc.indexed.wos | SCIE | en_US |
dc.indexed.wos | CPCIS | en_US |
dc.indexed.scopus | Scopus | en_US |
dc.wos.quartile | Q1 | en_US |
dc.contributor.scopusid | 11540936300 | tr_TR |
dc.contributor.scopusid | 6602910810 | tr_TR |
dc.subject.scopus | Silicon Steel; Soft Magnetic Materials; Iron | en_US |
Appears in Collections: | Web of Science |
Files in This Item:
There are no files associated with this item.
This item is licensed under a Creative Commons License