Please use this identifier to cite or link to this item:
http://hdl.handle.net/11452/27500
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.date.accessioned | 2022-06-29T12:02:26Z | - |
dc.date.available | 2022-06-29T12:02:26Z | - |
dc.date.issued | 2010 | - |
dc.identifier.citation | Işık, Y. (2010). "Tool life and performance comparison of coated tools in metal cutting". International Journal of Materials and Product Technology, 39(3-4), Special Issue, 240-250. | en_US |
dc.identifier.issn | 0268-1900 | - |
dc.identifier.uri | https://doi.org/10.1504/IJMPT.2010.035801 | - |
dc.identifier.uri | https://www.inderscience.com/info/inarticletoc.php?jcode=ijmpt&year=2010&vol=39&issue=3/4 | - |
dc.identifier.uri | http://hdl.handle.net/11452/27500 | - |
dc.description.abstract | The objective of the present work is to assess the effect of different coating materials on machinability in the turning of AISI 1050 steel. The cutting tools used in this research are PVD coated TiAlN, and CVD coated TiC + TiCN + TiN, TiC + AI(2)O(3) + TiN and TiN + TiCN + TiN inserts (ISO P25). The type of inserts is DNMG 150608. During the experiments cutting forces, and flank wear values were measured throughout the tool life. The machining performance of different coating materials was evaluated. In addition, cost analysis based on total machining cost per part was performed for the comparison of the economic viability between the different coating materials. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Inderscience Enterprises | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Flank wear | en_US |
dc.subject | Tool life | en_US |
dc.subject | Cutting forces | en_US |
dc.subject | Coating | en_US |
dc.subject | Cutting performance | en_US |
dc.subject | Machining performance | en_US |
dc.subject | Wear mechanisms | en_US |
dc.subject | Steel | en_US |
dc.subject | Coatings | en_US |
dc.subject | Inserts | en_US |
dc.subject | Speed | en_US |
dc.subject | Materials science | en_US |
dc.subject | Aluminum compounds | en_US |
dc.subject | Cost benefit analysis | en_US |
dc.subject | Metal cutting | en_US |
dc.subject | Plating | en_US |
dc.subject | Titanium carbide | en_US |
dc.subject | Titanium nitride | en_US |
dc.subject | Wear of materials | en_US |
dc.subject | Coating material | en_US |
dc.subject | Economic viability | en_US |
dc.subject | Performance comparison | en_US |
dc.subject | Tool life | en_US |
dc.subject | Cutting tools | en_US |
dc.title | Tool life and performance comparison of coated tools in metal cutting | en_US |
dc.type | Article | en_US |
dc.identifier.wos | 000285242300002 | tr_TR |
dc.identifier.scopus | 2-s2.0-77957822096 | tr_TR |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi | tr_TR |
dc.contributor.department | Uludağ Üniversitesi/Teknik Bilimler Meslek Yüksekokulu. | tr_TR |
dc.identifier.startpage | 240 | tr_TR |
dc.identifier.endpage | 250 | tr_TR |
dc.identifier.volume | 39 | tr_TR |
dc.identifier.issue | 3-4, Special Issue | tr_TR |
dc.relation.journal | International Journal of Materials and Product Technology | en_US |
dc.contributor.buuauthor | Işık, Yahya | - |
dc.subject.wos | Materials science, multidisciplinary | en_US |
dc.indexed.wos | SCIE | en_US |
dc.indexed.scopus | Scopus | en_US |
dc.wos.quartile | Q4 | en_US |
dc.contributor.scopusid | 8981150600 | tr_TR |
dc.subject.scopus | Cutting Force; Carbide Tools; Inconel (Trademark) | en_US |
Appears in Collections: | Scopus Web of Science |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.